Bỏ qua điều hướng / Skip navigation / 跳过导航
SAV Standard Technical Knowledge & Standards · 技术知识与标准
← Quay về← Back← 返回
SAV-SSNN-VL-07

Lớp cách nhiệt sànFloor insulation layer地面保温层

Yêu cầu kỹ thuậtTechnical requirements技术要求

Thông sốParameter参数Yêu cầuRequirement要求
Vật liệuMaterial材料XPS / EPS chịu lựcLoad-bearing XPS / EPS承压型 XPS / EPS
Độ dàyThickness厚度20 – 50 mm
Chịu nénCompressive strength抗压强度≥ 200 kPa
Hệ số λThermal conductivity λ导热系数 λ≤ 0.035 W/m·K

Hiểu trực quan dòng nhiệtVisualizing heat flow直观理解热流

Không có cách nhiệt:No insulation:无保温层:

Nhiệt chạy nhanh → thất thoát mạnhHeat flows quickly → significant heat loss热量快速传递 → 热损失较大

Có cách nhiệt (λ thấp):With insulation (low λ):有保温层(低 λ):

Nhiệt bị cản lại → giữ trong phòngHeat flow is restricted → heat is retained in the room热流受到阻碍 → 热量保留在室内

Công thức truyền nhiệtHeat transfer formula传热公式

q = (λ × ΔT) / d

  • q: W/m²
  • λ: W/m·K
  • ΔT: °C
  • d: m

W/m·K là gì?What is W/m·K?W/m·K 是什么?

λ là khả năng truyền nhiệt của vật liệu.λ represents the thermal conductivity of a material.λ 表示材料的导热能力。

λ = 0.035 nghĩa là → qua 1m vật liệu với ΔT = 1°C sẽ truyền 0.035Wλ = 0.035 means that 0.035 W of heat is transferred through 1 m of material when ΔT = 1°C.λ = 0.035 表示当温差 ΔT = 1°C 时,热量通过 1 m 厚的材料传递的数值为 0.035 W。

λ càng nhỏ → cách nhiệt càng tốt → giảm thất thoát nhiệtThe lower λ is → the better the insulation → the lower the heat lossλ 越小 → 保温性能越好 → 热损失越少

Tính thất thoát nhiệtCalculate heat loss计算热损失

👉 Tính thử👉 Try calculation👉 试算
TÍNHCALCULATE计算
Kết quả theo 1 m² sànResult per 1 m² of floor area按 1 m² 地面计算的结果
CHỌN SAIWRONG SELECTION错误选型
Không dùng cách nhiệt hoặc dùng vật liệu λ cao → nhiệt thất thoát liên tục xuống nền → tăng chi phí vận hành Not using insulation or using a material with a high λ value → continuous heat loss into the floor base → increased operating costs 未使用保温层或使用 λ 值较高的材料 → 热量持续向地基层散失 → 运行成本增加
↑